Order Products : sales@su-jiao.com
TECACOMP® PK TRM CF20 black 4181
| Category: | PK , Polyketone |
| Manufacturer: | Ensinger GmbH |
| Trademark: | TECACOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ifyog2_TECACOMPPKTRMCF20black4181.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Main features
Target Industries
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.30 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (240°C/2.16 kg) | 11 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (240°C/2.16 kg) | 9.00 | cm³/10min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Transverse flow | 1.1 | % | ISO 294-4 |
| Flow | 0.40 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.40 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 12700 | MPa | ISO 527-2 |
| Tensile Stress | 155 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 40 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 213 | °C | ISO 75-2/A |
| Glass Transition Temperature | 15.0 | °C | DIN 53765 |
| Melting Temperature | 220 | °C | DIN 53765 |
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow : 23 to 80°C | 5.8E-5 | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 80°C | 8.8E-5 | cm/cm/°C | ISO 11359-2 |
| Thermal Conductivity | DIN EN 821 | ||
| -- 1 | 0.39 | W/m/K | DIN EN 821 |
| -- 2 | 0.66 | W/m/K | DIN EN 821 |
| Service Temperature | |||
| long term | 100 | °C | |
| short term | 140 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 7.2E+4 | ohms·cm | ISO 3915 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability Classification | HB | IEC 60695-11-10, -20 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Processing (Melt) Temp | 220 - 250 | °C | |
| Mold Temperature | 120 | °C |
| Note Message | |
|---|---|
| 1 . | Through-plane |
| 2 . | In-plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tygon B-44-4X-I.B. | Saint Gobain - Norton | PVC, Unspecified | Tygon |
| ZYLAR® 765 | INEOS Styrolution Group GmbH | MMBS | ZYLAR® |
| Arnite® B434 SE | DSM Engineering Plastics | PBT | Arnite® |
| Eltex® A4009PFN1324 | INEOS Olefins & Polymers Europe | HDPE | Eltex® |
| Sylvin 6185-80 Grey 9132 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
