Order Products : sales@su-jiao.com
AEI TP-0832
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | AEI Compounds Limited |
| Trademark: | AEI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | If8Scf_AEI-TP-0832.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic, low smoke, halogen free, flame retardant compound for cable insulation and sheathing. This is a flame retardant, low smoke, thermoplastic compound which has been specially developed to meet the requirements of limited toxic and corrosive fume emission, having good moisture resistance and hot pressure performance. TP-0832 has been specially developed to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP-0832 have received LPCB approval. TP-0832 is available in the following versions:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.48 | g/cm³ | BS 2782 620A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 15.5 | MPa | IEC 60811-1-1 |
| Tensile Strain | |||
| Fracture | 170 | % | IEC 60811-1-1 |
| Fracture, -30°C 1 | 60 | % | IEC 60811-1-4 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength | IEC 60811-1-2 | ||
| 70°C, 168 hr, in water | -15 | % | IEC 60811-1-2 |
| 100°C, 168 hr | -10 | % | IEC 60811-1-2 |
| Change in Tensile Strain at Break | IEC 60811-1-2 | ||
| 70°C, 168 hr, in water | 15 | % | IEC 60811-1-2 |
| 100°C, 168 hr | 15 | % | IEC 60811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation | IEC 60811-3-1 | ||
| 90°C | 25 | % | IEC 60811-3-1 |
| 100°C | 30 | % | IEC 60811-3-1 |
| Cold shock (-30°C) | pass | IEC 60811-1-4 | |
| Cold bending (-30°C) | pass | IEC 60811-1-4 | |
| Heat-resistant stress cracking (80°C) | pass | Internal method | |
| Temperature index | 270 | °C | ISO 4589-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conduction rate- of gases | 2.10 | µS/cm | EN 50267-2-3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Corrosive gases in flue gas- pH | 5.80 | EN 50267-2-3 | |
| Smoke | 75 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Acid Gas Evolution | % | IEC 60754-1 | |
| Tear Strength | 8 | N/mm | BS 6469 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 160 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 32 | % | ISO 4589-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 130 | °C | |
| Cylinder Zone 3 Temp. | 140 | °C | |
| Cylinder Zone 4 Temp. | 150 | °C | |
| Melt Temperature | < 170 | °C | |
| Die Temperature | 160 | °C |
| Extrusion instructions |
|---|
| An extruder with an L/D ratio (length/diameter) of 15-24 and an extruder screw with a compression ratio 1.5:1 or less are recommended. |
| Note Message | |
|---|---|
| 1 . | pass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinkral® B 732/E | Versalis S.p.A. | ABS | Sinkral® |
| TAIRILAC AG15E1 | Formosa Plastics Corporation | ABS | TAIRILAC |
| Tarnamid® T- 27 MW 30 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| YUCLAIR® FT710 | SK Global Chemical | LLDPE | YUCLAIR® |
| AIE ABS 20G3F | Asia International Enterprise (Hong Kong) Limited | ABS | AIE ABS |
