Order Products : sales@su-jiao.com
UNISOFT TPE™ ST-75A-BK-3-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT TPE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IdAlRc_UNISOFT-TPE-ST-75A-BK-3-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 to 2.2 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 7.93 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 166 to 188 | °C | |
| Front Temperature | 188 to 210 | °C | |
| Nozzle Temperature | 210 to 224 | °C | |
| Mold Temperature | 29.4 to 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SynPlast™ DOA-FM | PolyOne Corporation | Di (2-ethylhexyl) Adipate | SynPlast™ |
| ALKAMIX™ MB-SAMBA | Marplex Australia Pty. Ltd. | Unspecified | ALKAMIX™ |
| Celcon® LW90-F2 | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
| Elastron® V V601.A95.N | Elastron USA, Inc. | TPV | Elastron® V |
| OmniCarb™ PC CBFR0 HSV | OMNI Plastics, LLC | PC | OmniCarb™ |
