| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ PTFE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IbuHom_3M-Dyneon-PTFE-TF-2072Z.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
PTFE fine powder for tubing, wire and cable applications Features
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 2.17 | g/cm³ | ISO 12086 |
| Apparent Density | 0.47 | g/cm³ | ISO 60 |
| Average Particle Size | 440 | µm | ISO 13320 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Extrusion Pressure - reduction ratio 1600 | 40.0 | MPa | ASTM D4895 |
| Reduction Ratio | 50-3000:1 | Internal Method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2 | 35.0 | MPa | ISO 527-3 |
| Tensile Elongation 3(Break) | 470 | % | ISO 527-3 |
| Note Message | |
|---|---|
| 1 . | measured on sintered moldings |
| 2 . | measured on sintered moldings |
| 3 . | measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NA40 KC50 BK111 | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| THERMOLAST® K TF8AAB (Series: FC/HE/tl) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Texalan® 2 Series 265A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 2 Series |
| Ultradur® S 4090 G2 | BASF Corporation | PBT+ASA | Ultradur® |
| Ecomann® Bioresin EM30010 | Shenzhen Ecomann Biotechnology Co., Ltd. | PHA | Ecomann® |