Order Products : sales@su-jiao.com

Braskem PP C791-30NA

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Braskem Europe GmbH
Trademark:	Braskem PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IbqrwG_Braskem-PP-C791-30NA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Braskem C791-30NA Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. Braskem C791-30NA Polypropylene Resin provides an excellent combination of mechanical performance with processability and antistatic properties. Advantages include high stiffness and superior impact resistance even at low temperatures. Applications for Braskem C791-30NA Polypropylene Resin: Industrial pails Thin wall containers Housewares Caps and closures Regulatory Information Braskem C791-30NA Polypropylene Resin should comply with EU, No 10/2011. It is the responsibility of the manufacturers of food contact articles and industrial food packers to make sure the articles in their actual use are in compliance with the imposed migration requirements. The appropriate regulations should be consulted for more detailed information. Compliance letters can be obtained through the Braskem sales representative.

Message

Braskem C791-30NA Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. Braskem C791-30NA Polypropylene Resin provides an excellent combination of mechanical performance with processability and antistatic properties. Advantages include high stiffness and superior impact resistance even at low temperatures.

Applications for Braskem C791-30NA Polypropylene Resin:

Industrial pails

Thin wall containers

Housewares

Caps and closures

Regulatory Information
Braskem C791-30NA Polypropylene Resin should comply with EU, No 10/2011. It is the responsibility of the manufacturers of food contact articles and industrial food packers to make sure the articles in their actual use are in compliance with the imposed migration requirements. The appropriate regulations should be consulted for more detailed information. Compliance letters can be obtained through the Braskem sales representative.

General Information
Agency Ratings	EU No 10/2011
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	30	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	26.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	9.0	%	ISO 527-2
Flexural Modulus (Injection Molded)	1450	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-20°C, Injection Molded	5.0	kJ/m²
0°C, Injection Molded	6.5	kJ/m²
23°C, Injection Molded	9.0	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature ¹(0.45 MPa, Unannealed)	96.0	°C	ISO 75-2/B
Vicat Softening Temperature ²	151	°C	ISO 306/A

Note Message
1 .	Injection Molded
2 .	Injection Molded

Resin Grade	Manufacturer	Category	Trademark
Mecoline IS RDX 5241 F	Melos GmbH	PVDF	Mecoline
ULTEM™ JD4901 resin	SABIC Innovative Plastics Asia Pacific	PEI	ULTEM™
Nanjing Hongrui PA66 A1000	Nanjing Hongrui Engineering Plastics Co., Ltd.	Nylon 66	Nanjing Hongrui PA66
ACRYREX® CM-205G	CHI MEI CORPORATION	Acrylic (PMMA)	ACRYREX®
Evoprene™ GC 5679	AlphaGary	SEBS	Evoprene™ GC