Order Products : sales@su-jiao.com
ALCUDIA® LDPE CN-102
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IZZ7l5_ALCUDIA-LDPE-CN-102.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® compound CN-102 has been esencially developed for coating of steel pipe using extrusion techniques. Furthermore it is designed for steelpipe coating to comply with the requirements of the DIN-30670 specification standard. CN-102 is a high viscosity high molecular weight low density polyethylene black compound which offers easy processing combined with smooth glossy surface finish, excellent resistance to mechanical deformation and corrosion. The combination of the antioxidant system and minimun of 2.2% well dispersed carbon black used in CN-102 provides the following features:
Because of the good mechanical properties and their characteristics, the polyethylene black compound ALCUDIA® CN-102, is designed to produce pipe. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.932 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.25 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | EN 638 | ||
| Yield | 12.0 | MPa | |
| Break | 16.0 | MPa | |
| Tensile Strain (Break) | 500 | % | EN 638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 1 | -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 2 |
| Oxidation Induction Time (210°C) | > 15 | min | EN 728 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 to 200 | °C | |
| Cylinder Zone 2 Temp. | 185 to 210 | °C | |
| Cylinder Zone 3 Temp. | 190 to 220 | °C | |
| Cylinder Zone 4 Temp. | 195 to 230 | °C | |
| Cylinder Zone 5 Temp. | 200 to 240 | °C | |
| Melt Temperature | 200 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | 0/10 failures |
| 2 . | Rate A (50°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALENE WPP391 | Southern Polymer, Inc. | PP Impact Copolymer | PRIMALENE |
| tefabloc® TO 113 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| ULTEM™ 2410EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| ARBOFORM® ZE 50 natur | TECNARO GmbH | CA | ARBOFORM® |
| LAPEROS® S475 | Polyplastics Co., Ltd. | LCP | LAPEROS® |
