Order Products : sales@su-jiao.com
TECHNYL® eXten D 238 V30 BLACK
| Category: | Nylon 610 , Polyamide 610 |
| Manufacturer: | Solvay Engineering Plastics |
| Trademark: | TECHNYL® eXten |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IXnkNq_TECHNYL-eXten-D-238-V30-BLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product in development - provisional datasheet TECHNYL® eXten D 238 V30 is a PA6,10 30% glass fibre reinforced and impact modified suitable for injection moulding. TECHNYL® eXten D 238 V30 is based on a partially bio-sourced polyamide 6,10 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.25 | -- | g/cm³ | ISO 1183/A |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 7400 | 5200 | MPa | ISO 527-2/1A |
| Tensile Stress (Break) | 120 | 90.0 | MPa | ISO 527-2/1A |
| Tensile Strain (Break) | 5.0 | 8.0 | % | ISO 527-2/1A |
| Flexural Modulus | 6800 | 5300 | MPa | ISO 178 |
| Flexural Stress | 199 | 155 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -- | 27 | 31 | kJ/m² | |
| -30°C | 15 | 18 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -- | 90 | -- | kJ/m² | |
| -30°C | 100 | -- | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 190 | -- | °C | ISO 75-2/Af |
| Melting Temperature | 215 | -- | °C | ISO 11357-3 |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 0.800 mm | HB | -- | ||
| 1.60 mm | HB | -- | ||
| 3.20 mm | HB | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 225 to 230 | °C | |
| Middle Temperature | 230 to 240 | °C | |
| Front Temperature | 240 to 250 | °C | |
| Mold Temperature | 80.0 to 100 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GP1001SW | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| KOPLA ABS KSG1020F | KOPLA Co., Ltd. | ABS | KOPLA ABS |
| PENTAMID AB L5 H1.2 schwarz | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
| PLUSTEK RB300G6 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| Elastocon® 2840 | Elastocon TPE Technologies | TPE | Elastocon® |
