Order Products : sales@su-jiao.com
SABIC® PPcompound 8533
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IXS9nz_SABICPPcompound8533.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 8533 is an elastomer-modified mineral filled Polypropylene for painted automotive exterior applications. This material has been designed to combine a good performance profile with good processing. SABIC® PPcompound 8533 is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.990 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.70 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5/50 | ||
| Yield, 3.20mm, injection molding | 19.0 | MPa | ISO 527-2/5/50 |
| Fracture, 3.20mm, injection molding | 12.5 | MPa | ISO 527-2/5/50 |
| Tensile Strain (Break, 3.20 mm, Injection Molded) | > 150 | % | ISO 527-2/5/50 |
| Flexural Modulus 1(Injection Molded) | 1550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180/4A | ||
| -20°C, injection molding | 20 | kJ/m² | ISO 180/4A |
| 0°C, injection molding | 60 | kJ/m² | ISO 180/4A |
| 23°C, injection molding | 60 | kJ/m² | ISO 180/4A |
| Note Message | |
|---|---|
| 1 . | Method I (three-point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 1360.7 | RTP Company | PPS | RTP |
| Techsil RTV12 | Techsil Limited | Silicone | Techsil |
| VAMPLUB F 40G 00TFSi | Vamp Tech | PPS | VAMPLUB |
| CP PRYME® Polypropylene PPC100-35M | Chase Plastics Services Inc. | PP Copolymer | CP PRYME® Polypropylene |
| DAI-EL™ G-751 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
