K PP 7073

Category: TPO , Compounded Polypropylene
Manufacturer: Technovinyl Polymers India Ltd.
Trademark: K PP
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: IWHbM3_K-PP-7073.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
K PP 7073 is a Compounded Polypropylene material. It is available in Africa & Middle East.

Important attributes of K PP 7073 are:
  • Flame Rated
  • Fast Molding Cycle
  • Heat Resistant
  • High Flow
  • High Hardness

Typical application of K PP 7073: Automotive
General Information
Features
  • Fast Molding Cycle
  • Good Heat Aging Resistance
  • Good Impact Resistance
  • High Flow
  • High Hardness
  • High Stiffness
  • Low Warpage
  • Scratch Resistant
Uses
  • Automotive Interior Trim
PhysicalNominal ValueUnitTest Method
Specific Gravity 0.990g/cm³ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)> 22g/10 minASTM D1238
Molding Shrinkage - Flow < 1.0%
HardnessNominal ValueUnitTest Method
Rockwell Hardness (R-Scale)116
MechanicalNominal ValueUnitTest Method
Tensile Strength (Yield)43.1MPaASTM D638
Flexural Modulus 2600MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (23°C)25J/mASTM D256
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)138°CASTM D648
FlammabilityNominal ValueTest Method
Flame Rating HBUL 94
Additional InformationNominal ValueUnit
Heat Resistance - Long Term > 125°C
Resin Grade Manufacturer Category Trademark
RheTech Polypropylene FRP257-01 RheTech, Inc. PP Copolymer RheTech Polypropylene
TAFMER™ A-0550S Mitsui Chemicals America, Inc. PAO TAFMER™
TECHLEN M1500 DAEHA Co., LTD PP, Unspecified TECHLEN
NOVADURAN® 5010TRXA Mitsubishi Engineering-Plastics Corp PBT NOVADURAN®
LUVOCOM® 1-0866 Lehmann & Voss & Co. Nylon 66 LUVOCOM®