Order Products : sales@su-jiao.com
Tunhe PBT TH6085
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Xinjiang Blueridge Tunhe Chemical Industry Co.,Ltd |
| Trademark: | Tunhe PBT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IVgt2X_TunhePBTTH6085.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tunhe PBT TH6085 is a polybutene terephthalate (PBT) product,. It is available in the Asia-Pacific region. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 - 1.32 | g/cm³ | ASTM D792B |
| Melt Mass-Flow Rate (MFR) 1 | 55 - 65 | g/10 min | ASTM D1238 |
| Color b | 1.00 - 5.00 | GB/T 14190 | |
| Color L | > 90.0 | GB/T 14190 | |
| Particle Mass | 2.00 - 2.40 | g/100 pcs | GB/T 14190 |
| Intrinsic Viscosity | 0.70 - 1.0 | dl/g | GB/T 14190 |
| Moisture Content | % | GB/T 14190 | |
| Ash Content | mg/kg | GB/T 14190 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Carboxyl End Groups | mol/t | GB/T 14190 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 50.0 - 60.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 100 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | > 40.0 | kJ/m² | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | > 222 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (2.00 mm) | > 2.0 | kV/mm | ASTM D149 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMLLOY PFS302G14 | Polyram Ram-On Industries | PBT+ASA | RAMLLOY |
| SuperLite® SL552000-100 (2.0mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| NEMCON H PC DP184 | Ovation Polymers Inc. | PC | NEMCON H |
| ADDILENE J 520 M40 | ADDIPLAST | PP Copolymer | ADDILENE |
| AKROMID® B3 GF 40 black (3383) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
