Order Products : sales@su-jiao.com
Hyundai EP Adhesives LE130A/1002
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | HYUNDAI EP Co., Ltd. |
| Trademark: | Hyundai EP Adhesives |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IVSmSn_Hyundai-EP-Adhesives-LE130A-1002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hyundai EP Adhesives LE130A/1002 is a Polyethylene product. It is available in Asia Pacific. Typical application: Adhesives/Tapes. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.902 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Water Absorption (24 hr) | < 0.010 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 39 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 16.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 770 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 75.0 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Adhesion Strength | > 2.7 | kN/m | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® F02-137D | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Polylink Polymer P-11020-GF | Polylink Polymers (India) Ltd. | TPO | Polylink Polymer |
| Tenite™ Butyrate 285A3720010 Clear, Trsp | Eastman Chemical Company | CAB | Tenite™ Butyrate |
| DURANEX® 3300 | Polyplastics Co., Ltd. | PBT | DURANEX® |
| Hostaform® S 9363 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
