Order Products : sales@su-jiao.com
DOW™ LDPE 722S
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IV3WYi_DOW-LDPE-722S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ LDPE 722S is a Low Density Polyethylene Resin material. It is available in Latin America. Typical application of DOW™ LDPE 722S: Food Contact Applications |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (vs. Itself - Dynamic) | 0.60 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Seal Initiation Temperature (25 µm) | 105 | °C | Internal Method |
| Water Vapor Transmission Rate (25 µm) | 0.67 | g·mm/m²/atm/24 hr | ASTM F1249 |
| Extrusion | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Temperature | 316 to 332 | °C | |
| Minimum Coating Weight | 13 | g/m² | Internal Method |
| Neck-in (321°C, 25.4 µm) | 40.6 | mm | Internal Method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 202D TFE 10 | RTP Company | Nylon 612 | RTP |
| Rotec® ASA S 310 | ROMIRA GmbH | ASA | Rotec® ASA |
| Novodur® P3H-AT | Styrolution | ABS | Novodur® |
| DIC.PPS FZ-3500 | DIC Corporation | PPS | DIC.PPS |
| Innothane® IE-70D | Innovative Polymers, Inc. | TSU | Innothane® |
