Order Products : sales@su-jiao.com
Formolene® HB5502B
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IUmFEh_Formolene-HB5502B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene HB5502B is designed for applications requiring excellent stiffness and stress crack resistance properties. It may be used as a general-purpose blow molding resin or sheet extrusion thermoforming resin. Formolene HB5502B meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| Compression Molded, F50 | 35.0 | hr | ASTM D1693B |
| 100% Igepal, Compression Molded, F50 | 45.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 600 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1380 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MonoSol® D-7031 XR | MonoSol, LLC | PVOH | MonoSol® |
| ESTAPROP 1000 V2 K | Cossa Polimeri S.r.l. | PP Copolymer | ESTAPROP |
| OnForce™ LFT PP-60LGF/001 Black UV | PolyOne Corporation | PP Homopolymer | OnForce™ LFT |
| Sylvin 9067-90 Grey 991 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| GELOY™ XP4034 resin | SABIC Innovative Plastics | ASA | GELOY™ |
