Order Products : sales@su-jiao.com

Miramid® S3KC

Category:	Nylon 66 , Polyamide 66
Manufacturer:	BASF Leuna GmbH
Trademark:	Miramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ITPcuq_Miramid-S3KC.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Miramid® S3KC is a Polyamide 66 (Nylon 66) material. It is available in Europe for injection molding.

Important attributes of Miramid® S3KC are:

Flame Rated

Chemical Resistant

Fast Molding Cycle

Mold Release Agent

Rigid

Typical applications include:

Engineering/Industrial Parts

Electrical/Electronic Applications

General Information
Additive	Mold Release
Features	Fast Molding Cycle Fuel Resistant Good Flow Grease Resistant High Rigidity Oil Resistant Solvent Resistant
Uses	Connectors Engineering Parts Plugs Thin-walled Parts
Forms	Granules
Processing Method	Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density	1130	--	kg/m³	ISO 1183 ¹
Water Absorption				ISO 62 ²
Saturation	7.5	--	%
Equilibrium	2.5	--	%
Viscosity number	145	--	cm³/g	ISO 307, 1157, 1628 ³

Hardness	Dry	Conditioned	Unit	Test Method
Ball Indentation Hardness	160	--	MPa	ISO 2039-1

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus	3500	1600	MPa	ISO 527-2 ⁴
Tensile Stress (Yield)	90.0	60.0	MPa	ISO 527-2 ⁵
Tensile Strain (Yield)	4.0	20	%	ISO 527-2 ⁶

Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength (23°C)	3.00	15.0	kJ/m²	ISO 179/1eA ⁷
Charpy impact strength (23°C)	No Break	No Break		ISO 179/1eU ⁸

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ISO 75-2 ⁹
0.45 MPa	200	--	°C
1.8 MPa	70.0	--	°C
Continuous Use Temperature				ISO 2578
-- ¹⁰	90.0	--	°C
-- ¹¹	105	--	°C
-- ¹²	200	--	°C
Melting Temperature (DSC)	260	--	°C	ISO 3146

Electrical	Dry	Conditioned	Unit	Test Method
Volume resistivity	1.0E+13	1.0E+10	ohms·m	IEC 60093 ¹³
Dielectric Constant (1 MHz)	3.40	5.00		IEC 60250
Dissipation Factor (1 MHz)	0.025	0.20		IEC 60250 ¹⁴
Comparative tracking index	600	--		IEC 60112 ¹⁵

Flammability	Dry	Conditioned	Unit	Test Method
Burning Rate (1.00 mm)	< 100	--	mm/min	FMVSS 302
Flame Rating (1.50 mm)	V-2	--		UL 94
Burning Behav. at thickness h (1.50 mm)	V-2	--		ISO 1210 ¹⁶
Glow Wire Flammability Index (1.00 mm)	960	--	°C	IEC 60695-2-12

Injection	Dry	Unit
Processing (Melt) Temp	280 to 300	°C
Mold Temperature	70.0 to 80.0	°C

Note Message
1 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
4 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
6 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
8 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
9 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .	Temperature index at loss of 50% tensile strength, 20000h
11 .	Temperature index at loss of 50% tensile strength, 5000h
12 .	Short time
13 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
14 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
15 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
16 .	Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Resin Grade	Manufacturer	Category	Trademark
Makrolon® 1248	Covestro - Polycarbonates	PC	Makrolon®
RTP 801 TFE 10 DEL	RTP Company	Acetal (POM) Copolymer	RTP
Medalist® MD-50133	Teknor Apex Company	TPE	Medalist®
Xuchuan XCW-30GL	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
NuSil MED-4901	NuSil Technology	Silicone Rubber, LSR	NuSil