Order Products : sales@su-jiao.com
DJSilicone NE-9150
| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IPTru0_DJSilicone-NE-9150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Character: Excellent physical properties, anti-yellowing performance, and good processability Application: NE-91 is suitable for molding application with higher transparency requirements. (E.g. keypad, sanitation commodity for living, O-ring, seal ring (parts for industrial use) |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.11 to 1.19 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 2.9 to 3.4 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 48 to 52 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 8 | % | ASTM D412 |
| Tensile Strength (Yield) | > 8.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 500 | % | ASTM D412 |
| Tear Strength | > 25.0 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 22 | kV/mm | ASTM D149 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXTEL® 600GF30 | MRC Polymers, Inc. | PP, Unspecified | MAXTEL® |
| TOTAL Polyethylene Lumicene® M 2710 EP (US) | TOTAL Refining & Chemicals | MDPE | TOTAL Polyethylene |
| Ultramid® A34 01 | BASF Corporation | Nylon 66 | Ultramid® |
| NuSil MED-6015 | NuSil Technology | Silicone | NuSil |
| DIC.PPS FZ-3360 | DIC Corporation | PPS | DIC.PPS |
