Order Products : sales@su-jiao.com
RTP 200F MS
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IOgMwI_RTP-200F-MS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 1.2 | % | |
| 6.35 mm, Injection Molded | 1.6 | % | |
| Water Absorption (23°C, 24 hr) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1720 | MPa | ASTM D638 |
| Tensile Strength | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1650 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 57.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1600 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 216 to 266 | °C | |
| Middle Temperature | 216 to 266 | °C | |
| Front Temperature | 216 to 266 | °C | |
| Mold Temperature | 66.0 to 104 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 302 TFE 10 | RTP Company | PC | RTP |
| RTP PP 20 TALC | RTP Company | PP, Unspecified | RTP |
| Ethylplus CO 125 | Fainplast Compounds S.r.l | PE, Unspecified | Ethylplus |
| DIC.PPS FZ-1130 | DIC Corporation | PPS | DIC.PPS |
| ELASTOSIL® FLR 3905/40 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® FLR |
