Order Products : sales@su-jiao.com
Prime ABS Weather-X ML200
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Primex Plastics Corporation |
| Trademark: | Prime ABS Weather-X |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IMayus_Prime-ABS-Weather-X-ML200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Offering one of the highest aesthetics, gloss and depth of image in the industry, our Weather-X ML200 may consist of 3-5 layers but is typically 3 consisting of clear acrylic, colored acrylic and ABS. Key properties are surface hardness, chemical resistance, weatherability, toughness and excellent formability. Applications: Include; RV, automotive, transportation and marine industries. Processing: Surface Temp = 325-350°F Mold Temp = 150-175°F De-mold @ 170°F Mold shrink is .004-.008 in/in. Oven heaters on gloss side should be somewhat lower than on the substrate side. The sheet must be fully saturated with heat before forming. Finishing: When drilling co-extruded sheet with an acrylic modified drill bit, be sure to exit from the acrylic side but when drilling with a standard bit, be sure to have the bit exit from the substrate side. For accuracy and safety, acrylic capped sheet should be clamped during drilling. For cutting/trimming Weather-X ML 200 sheet with CNC or air routers, a standard solid carbide fiberglass router -diamond-cut tool can be used. Routing parts in a CNC environment is best done with chip-breaker-type, solid carbide tools. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: The surface is typically high gloss. Colors include Solids, Granite, Pearlescent, Swirl, Metallics, Soft White and Metamerism effects. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.40 to 0.80 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 102 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 40.7 | MPa | ASTM D638 |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Flexural Strength | 65.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 220 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 87.8 | °C | ASTM D648 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gardner Gloss (60°) | 85 | ASTM D523 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| De-mold Temperature | 77 | °C | |
| Mold Temperature (other) | 66 to 79 | °C | |
| Surface Temperature | 163 to 177 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TPX® MX004XB | Mitsui Chemicals, Inc. | PMP Copolymer | TPX® |
| Nipol® 1472X | Zeon Chemicals L.P. | NBR | Nipol® |
| Hostaform® C 2521 G | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Pibiter® HI A1301 NAT001 | SO.F.TER. SPA | PBT | Pibiter® HI |
| Rotuba CAP CP811 | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
