Order Products : sales@su-jiao.com
Osterlene® LD-2-925
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IMYCNF_Osterlene-LD-2-925.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LD-2-925 is a film grade resin that exhibits excellent optics, good gloss and good bubble stability. A typical application for this resin is high clarity packaging. LD-2-925 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - 1% Secant, MD | 214 | MPa | ASTM D882 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 10.3 | MPa | ASTM D882 |
| Fracture | 23.4 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 250 | % | ASTM D882 |
| Dart Drop Impact (23°C) | 55 | g | ASTM D1709 |
| Elmendorf Tear Strength - MD | 140 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 95 | ASTM D2457 | |
| Haze | 5.5 | % | ASTM D1003 |
| Additional Information |
|---|
| The value shown as Secant Modulus, ASTM D882, was tested in accordance with ASTM E111.The value shown as Density, ASTM D1505, was tested in accordance with ASTM D1558.Product LD-2-925-SHAL: Slip - High, Antiblock(ppm) - LowProduct LD-2-925-AM: Slip - None, Antiblock(ppm) - Medium |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature (Aim) | 160 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® S4665 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Vexel PBT B50U | Custom Resins Group | PBT | Vexel |
| COPEC® CC6OCN (Series: VS/AD1) | KRAIBURG TPE | TPE | COPEC® |
| Hostaform® C 2521 G | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Luran® 348Q | Styrolution | SAN | Luran® |
