Order Products : sales@su-jiao.com
Innothane® IE-40A
| Category: | TSU-Ether , Polyurethane Thermoset Elastomer, Polyether Based |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | Innothane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IIwLF7_Innothane-IE-40A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IE-40A is an elastic polyether system formulated for hand-batch processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. IE-40A is ideal for color matching due to it's neutral color. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| Cured | 1.10 | g/cm³ | |
| Hardener | 1.10 | g/cm³ | |
| Base Resin | 1.16 | g/cm³ | |
| Molding Shrinkage - Flow | 0.10 to 0.30 | % | ASTM D2566 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 100 Mix Ratio by Weight: 95 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 720 to 1200 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 0.63 | Pa·s | |
| 25°C 2 | 0.95 | Pa·s | |
| 25°C 3 | 1.7 | Pa·s | |
| Curing Time 4 | 40 | hr | |
| Gel Time | 20 to 30 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 32 to 42 | ASTM D2240 | |
| Tensile Strength | 3.48 | MPa | ASTM D638 |
| Tensile Elongation at Break | 400 | % | ASTM D638 |
| Tear Strength | 13.1 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Mixed |
| 3 . | Hardener |
| 4 . | 24 hours at 77°F + 16 hours at 150°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RONFALIN® TRE35 | A. Schulman Europe | ABS | RONFALIN® |
| Adell Polyamide BR-38 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Geon™ HC 2170 | PolyOne Corporation | PVC, Flexible | Geon™ HC |
| Hapflex™ 871-4 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| POLYblend PC/ABS 65H MA5 | Polykemi AB | PC+ABS | POLYblend |
