Order Products : sales@su-jiao.com
RTP EMI 2862-63A
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IIVAR7_RTP-EMI-2862-63A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.0 - 1.5 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.050 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 68.9 | MPa | ASTM D638 |
| Tensile Strength | 1.38 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | No Break | ASTM D256 | |
| Unnotched Izod Impact (3.18 mm) | No Break | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+5 | ohms | ASTM D257 |
| Volume Resistivity | 10 | ohms·cm | ASTM D257 |
| Additional Information |
|---|
| Tensile Elongation, ASTM D638: 8-12%Shielding Effectiveness, ASTM D4935: 12-45+ dBMolding Shrinkage, ASTM D 955, 3.175mm: 8-12mm/mStatic Decay, FTMS-4046.1, Mil B-81705C: <2.0 seconds |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 - 232 | °C | |
| Middle Temperature | 177 - 232 | °C | |
| Front Temperature | 177 - 232 | °C | |
| Mold Temperature | 15.6 - 65.6 | °C | |
| Injection Pressure | 68.9 - 138 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 299 X 93636 B | RTP Company | Nylon 66 | RTP |
| Radilon® S 40F 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| SLOVAMID® 66 GB 30 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Adell Polyamide BW-17 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| FREQTIS® P0833A | Polyplastics Co., Ltd. | PPS | FREQTIS® |
