Order Products : sales@su-jiao.com

CYCOLAC™ INP338T resin

Category:	ABS , Acrylonitrile Butadiene Styrene
Manufacturer:	SABIC Innovative Plastics
Trademark:	CYCOLAC™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IIM8iy_CYCOLAC-INP338T-resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SABIC INP338T is an ultra high rubber ABS impact modifier resin, and is based on polybutadiene rubber. Offers superior impact efficiency, especially at low temperatures. Reduces notch sensitivity when alloyed with engineering polymers. Disperses easily. Provides abrasion and chemical resistance to polymers. Provides toughness to PVC sheet, profile, electrical conduit and injection molded applications. Increases the impact strength of recycle PVC and other recyclates. Can be blended with polyurethanes and other polymers for improved performance and economics. Can be used to improve the impact performance of PC, polyesters, and CPVC.

Message

SABIC INP338T is an ultra high rubber ABS impact modifier resin, and is based on polybutadiene rubber. Offers superior impact efficiency, especially at low temperatures. Reduces notch sensitivity when alloyed with engineering polymers. Disperses easily. Provides abrasion and chemical resistance to polymers. Provides toughness to PVC sheet, profile, electrical conduit and injection molded applications. Increases the impact strength of recycle PVC and other recyclates. Can be blended with polyurethanes and other polymers for improved performance and economics. Can be used to improve the impact performance of PC, polyesters, and CPVC.

General Information
Additive	Rubber Impact Modifier
Features	Dispersible Good Abrasion Resistance Good Toughness Low Temperature Impact Resistance
Uses	Blending

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--	0.948	g/cm³	ASTM D792
-- ¹	0.960	g/cm³	ISO 1183
Apparent Density	0.25	g/cm³	ASTM D1895
BD	70	%	Internal Method
Mean Particle Size	200.0	µm	Internal Method
Total NA Volatiles	0.20	%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	40		ASTM D2240

Note Message
1 .	Molded

Resin Grade	Manufacturer	Category	Trademark
POLYLAC® PA-709P	CHI MEI CORPORATION	ABS	POLYLAC®
RheTech Thermoplastic Polyolefin FT4702-715UV	RheTech, Inc.	Polyolefin, Unspecified	RheTech Thermoplastic Polyolefin
VENELENE® LA-0903	Poliolefinas Internacionales, C.A. (Polinter)	LDPE	VENELENE®
UPES® 315-F	NOVA Chemicals	PS+PE	UPES®
Polifor® 5020/V2 NATURALE	SO.F.TER. SPA	PP Homopolymer	Polifor®