Medalist® MD-12130H (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Medalist MD-12100H series are high performance thermoplastic elastomers designed for use in medical and healthcare applications requiring high flow. Medalist MD-12130H is a low density, low hardness, resilient grade, available in NAT and colors, which can be sterilized and exhibits excellent adhesion to polypropylene.

General Information
Features	Low Specific Gravity Without Fillers Low density Pressure cooker disinfection smoothness Good disinfection Ethylene oxide disinfection Anti-gamma radiation Good formability Good flexibility Good coloring High liquidity Good chemical resistance Good toughness Halogen-free Hardness, low Elastic
Uses	Disposable Hospital Goods Handle Plug Bushing Washer Connector Seals Airbag Soft handle Rubber substitution Knob Drug Medical/nursing supplies
Agency Ratings	ISO 10993 Part 5 ISO 13485
RoHS Compliance	RoHS compliance
Appearance	Translucent Available colors Natural color
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.881	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	32	ASTM D2240
Shore A, 5 seconds, injection molding	30	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
50% strain	0.724	MPa	ASTM D412
100% strain	0.965	MPa	ASTM D412
300% strain	1.72	MPa	ASTM D412
Tensile Strength ²(Break)	4.86	MPa	ASTM D412
Tensile Elongation ³(Break)	750	%	ASTM D412
Tear Strength ⁴	19.3	kN/m	ASTM D624
Compression Set ⁵			ASTM D395
23°C, 22 hr	17	%	ASTM D395
70°C, 22 hr	81	%	ASTM D395

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	160 - 177	°C
Middle Temperature	182 - 204	°C
Front Temperature	193 - 216	°C
Nozzle Temperature	182 - 227	°C
Processing (Melt) Temp	182 - 227	°C
Mold Temperature	27 - 49	°C
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 12.7	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Medalist™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IHq5so_MedalistMD12130HPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SLOVALEN® PC 93 T 5	Plastcom	PP, Unspecified	SLOVALEN®
Duratron® U2300	Quadrant Engineering Plastic Products	PEI	Duratron®
Geon™ Vinyl Flexible R323AE	PolyOne Corporation	PVC Elastomer	Geon™ Vinyl Flexible
KumhoSunny ABS HAG5223	Shanghai KumhoSunny Plastics Co., Ltd.	ABS	KumhoSunny ABS
3M™ Dyneon™ PTFE Compound TF 8390	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound