Order Products : sales@su-jiao.com
Bionate® 80A
| Category: | PC+TPU , Polycarbonate + TPU |
| Manufacturer: | DSM Biomedical Inc. |
| Trademark: | Bionate® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IHdcXn_Bionate-80A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bionate® 80A is a Polycarbonate + TPU (PC+TPU) product. It can be processed by extrusion or injection molding and is available in North America. Applications of Bionate® 80A include medical/healthcare and food contact applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.19 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (224°C/1.2 kg) | 22 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| -- 1 | 1.2 | % | |
| -- 2 | 0.0 to 3.0 | % | |
| Water Absorption (Saturation) | 1.2 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Ultimate | 46.6 | MPa | |
| 50% Strain | 4.37 | MPa | |
| 100% Strain | 6.01 | MPa | |
| 300% Strain | 16.9 | MPa | |
| Tensile Elongation (Break) | 530 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 28.7 | MPa | ASTM D790 |
| Flexural Strength (5.0% Strain) | 1.24 | MPa | ASTM D790 |
| Coefficient of Friction (vs. Itself - Dynamic) | 1.5 | ASTM D1894 | |
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 5.70 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | 64.8 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 78.3 | °C | ASTM D1525 |
| CLTE - Flow | 1.6E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 17 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 5.00 | ASTM D150 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 177 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | 4.0 in disk |
| 2 . | Flame bar |
| 3 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GA-1055 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E PVC |
| VeroCyan™ RGD841 | Stratasys | Unspecified | VeroCyan™ |
| Gallonprene® GP210-8504 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Elastollan® 1185 A HFFR | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
| Hostacom HKC 182L W92607 | LyondellBasell Industries | PP Homopolymer | Hostacom |
