Order Products : sales@su-jiao.com
EMERGE™ PC 8702-15 (EU)
| Category: | PC , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IG8UlZ_EMERGE-PC-8702-15-EU-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMERGE™ PC 8702-15 Advanced Resin is an ignition-resistant , 20% glass reinforced, polycarbonate resin containing no bromine, chlorine , or phosphate additives. It is an easy flow resin with a mold release system designed for thin wall injection moulding applications. Applications:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ISO 1183/B |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 15 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 0.20 to 0.40 | % | |
| Flow | 0.20 to 0.40 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (4.00 mm, Injection Molded) | 5800 | MPa | ISO 527-2/1 |
| Tensile Stress | ISO 527-2/50 | ||
| Yield, 4.00 mm, Injection Molded | 100 | MPa | |
| Break, 4.00 mm, Injection Molded | 90.0 | MPa | |
| Tensile Strain (Break, 4.00 mm, Injection Molded) | 3.5 | % | ISO 527-2/50 |
| Flexural Modulus 1(4.00 mm, Injection Molded) | 5500 | MPa | ISO 178 |
| Flexural Stress 2(4.00 mm, Injection Molded) | 150 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 8.8 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact Strength (23°C, Injection Molded) | 8.3 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 143 | °C | ISO 75-2/B |
| 0.45 MPa, Annealed | 148 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 138 | °C | ISO 75-2/A |
| 1.8 MPa, Annealed | 143 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 150 | °C | ISO 306/B50 |
| Ball Indentation Temperature | > 135 | °C | IEC 60335-1 |
| CLTE | ASTM D696 | ||
| Flow : -40 to 80°C | 5.2E-5 | cm/cm/°C | |
| Transverse : -40 to 80°C | 2.5E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 3.0E+14 | ohms | IEC 60093 |
| Volume Resistivity (1.80 mm) | 1.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength (1.60 mm) | 27 | kV/mm | IEC 60243-1 |
| Dielectric Constant | IEC 60250 | ||
| 1.60 mm, 10 Hz | 3.10 | ||
| 1.60 mm, 1 MHz | 3.10 | ||
| Comparative Tracking Index (3.00 mm, Solution A) | 175 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 3 | UL 94 | ||
| 0.750 mm | V-2 | ||
| 1.60 mm | V-0 | ||
| Glow Wire Ignition Temperature 4 | IEC 60695-2-13 | ||
| 1.00 mm | 960 | °C | |
| 2.00 mm | 960 | °C | |
| 3.00 mm | 960 | °C | |
| Oxygen Index 5 | 35 | % | ISO 4589-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Processing (Melt) Temp | 300 | °C | |
| Mold Temperature | 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 4 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 5 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tufpet PBT N2100 | Mitsubishi Rayon America Inc. | PBT | Tufpet |
| ChronoFlex® C 55D | CardioTech International, Inc. | PUR, Unspecified | ChronoFlex® |
| GTPO™ 8102 | S&E Specialty Polymers, LLC | TPO (POE) | GTPO™ |
| LubriOne™ LB6000-5003BK | PolyOne Corporation | Nylon 6 | LubriOne™ |
| TABOREN® PH 52 G 30-073 | SILON s.r.o. | PP Homopolymer | TABOREN® |
