Order Products : sales@su-jiao.com
Epocast 1628 A/B
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Huntsman Advanced Materials |
| Trademark: | Epocast |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IG3Pdc_Epocast-1628-A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DESCRIPTION: Epocast® 1628-A epoxy resin is a soft white paste that, after blending with yellow-colored Epocast® 1628-B hardener, becomes a pale yellow, ultra low density epoxy syntactic for edge reinforcing of honeycomb structures. The lightweight epoxy paste can be spread with a putty knife or trowel to fill honeycomb core sections or edges of composite sandwich constructions. Epocast® 1628-A/B epoxy syntactic can be easily sanded or machined after cure. Epocast® 1628-A/B epoxy syntactic is qualified to BMS 5-28, Type 28. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D1622 | ||
| -- 1 | 0.450 | g/cm³ | ASTM D1622 |
| -- 2 | 0.500 | g/cm³ | ASTM D1622 |
| -- 3 | 0.520 | g/cm³ | ASTM D1622 |
| Viscosity | ASTM D2196 | ||
| -- 4 | Paste | ASTM D2196 | |
| -- 5 | Paste | ASTM D2196 | |
| -- 6 | Paste | ASTM D2196 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability 7 | FAR 25.853 | ||
| Burn Length | 7.62 | cm | FAR 25.853 |
| Extinguish Time | 0.0 | hr | FAR 25.853 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time - 60 gms (25°C) | 1.1 | hr | ASTM D2471 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time (25°C) | 2.0 | day | |
| Tensile Lap Shear - etched al/al (25°C) | 5.52 | MPa | ASTM D1002 |
| Weight Gain 8 | ASTM D543 | ||
| Distilled water : 25°C | 3.4 | % | ASTM D543 |
| Mil-M-5606, hydraulic fluid : 25°C | 2.5 | % | ASTM D543 |
| Mil-S-3136, Type III test fluid : 25°C | 1.5 | % | ASTM D543 |
| Skydrol 500-A : 25°C | 3.5 | % | ASTM D543 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Modulus | 1590 | MPa | ASTM D695 |
| Compressive Strength (25°C) | 19.3 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Resin | Mixing ratio by weight: 100 | ||
| Hardening method | Mixing ratio by weight: 25 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CURE SCHEDULE: 48 hours at 77°F (25°C), or gel at room temperature plus 5 hours at 125°F (52°C). |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | System |
| 3 . | Hardener |
| 4 . | Resin |
| 5 . | Hardener |
| 6 . | System |
| 7 . | 60-second vertical |
| 8 . | on immersion - 24 hrs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD A 1200 90A | RTP Company | TPU-Polyester | RTP |
| Spectar™ Frost Copolyester | Eastman Chemical Company | Copolyester | Spectar™ |
| Cellophane™ K250AC29 | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| ExxonMobil™ LLDPE LL 6301 Series Wire & Cable | ExxonMobil Chemical | LLDPE | ExxonMobil™ LLDPE |
| LNP™ THERMOCOMP™ QF008 compound | SABIC Innovative Plastics | Nylon 610 | LNP™ THERMOCOMP™ |
