Order Products : sales@su-jiao.com

TECHNO AES W247

Category:	AES , Acrylonitrile Ethylene Styrene
Manufacturer:	Techno Polymer America, Inc.
Trademark:	TECHNO AES
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IEt9RT_TECHNO-AES-W247.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Weather-resistant resin for exterior automobile parts without painting

Satisfying the three requirements for exterior part resins: high impact strength under low temperature, high heat distortion temperature, and weather-resistance

Specific gravity that is 10% lower than that of PC/ASA resin to enable lower part weight

Designed for easy and consistent injection molding to enable greater design flexibility, faster cycle times, and reduced scrap, thus resulting in higher productivity

The best material for exterior automobile parts that require a higher aesthetic appearance

General Information
Features	Fast Molding Cycle Good Flexibility Good Weather Resistance High Impact Resistance Low Temperature Impact Resistance Medium Heat Resistance Pleasing Surface Appearance
Uses	Automotive Exterior Parts
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.05	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/10.0 kg)	29	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	44.0	MPa	ASTM D638
Flexural Modulus	2140	MPa	ASTM D790
Flexural Strength	62.0	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-30°C	88	J/m
23°C	180	J/m

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	100	°C	ASTM D648

Injection	Nominal Value	Unit
Drying Temperature	82.2 to 93.3	°C
Drying Time	3.0 to 5.0	hr
Rear Temperature	204 to 249	°C
Middle Temperature	204 to 249	°C
Front Temperature	204 to 249	°C
Mold Temperature	48.9 to 71.1	°C

Resin Grade	Manufacturer	Category	Trademark
PRIME TPO M142E	Prime Polymer Co., Ltd.	PP Impact Copolymer	PRIME TPO
Moplen PM784W-H	LyondellBasell Industries	PP Impact Copolymer	Moplen
TYNAB® GM70	Tyne Plastics LLC.	ABS	TYNAB®
ALCOM® PC 740/4.2 UV WT1100-08LD2	ALBIS PLASTIC GmbH	PC	ALCOM® PC
Latamid 66 H2 G/25-V0HF1	LATI S.p.A.	Nylon 66	Latamid