LTM® 123

Category:	TS, Unspecified , Thermoset, Unspecified
Manufacturer:	Cytec Industries Inc.
Trademark:	LTM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	IEPn2Q_LTM-123.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
LTM123 is a low temperature curing, toughened cyanate ester component prepreg developed for structural applications requiring ultimate dimensional stability in a space environment. Its low moisture absorption and low electrical permittivity characteristics also make it suitable for radomes and radar absorbing structures. LTM123 is also suitable for high service temperature structural applications in the motorsport market. LTM123 can be processed using autoclave and oven vacuum bag methods to produce low voidage composites and can be moulded off a range of low cost tooling with few constraints on structure dimensions. For space applications, LTM 123 can develop a Tg of 140°C (284°F) after a minimum initial cure at 80°C (176°F) and a free-standing post-cure of 120°C (248°F) For motorsport applications, LTM 123 can develop a Tg of 250°C (482°F) after a minimum initial cure at 80°C (176°F) and free-standing post-cure of 240°C (464°F)

Message

LTM123 is a low temperature curing, toughened cyanate ester component prepreg developed for structural applications requiring ultimate dimensional stability in a space environment. Its low moisture absorption and low electrical permittivity characteristics also make it suitable for radomes and radar absorbing structures. LTM123 is also suitable for high service temperature structural applications in the motorsport market.

LTM123 can be processed using autoclave and oven vacuum bag methods to produce low voidage composites and can be moulded off a range of low cost tooling with few constraints on structure dimensions.

For space applications, LTM 123 can develop a Tg of 140°C (284°F) after a minimum initial cure at 80°C (176°F) and a free-standing post-cure of 120°C (248°F)

For motorsport applications, LTM 123 can develop a Tg of 250°C (482°F) after a minimum initial cure at 80°C (176°F) and free-standing post-cure of 240°C (464°F)

General Information
Filler / Reinforcement	Aramid Fiber Carbon Fiber Glass Fiber
Features	Autoclavable Good Dimensional Stability Good Toughness Heat Cure High Heat Resistance Humidity Resistant
Uses	Aerospace Applications Automotive Applications
Forms	Fabric

Physical	Nominal Value	Unit
Specific Gravity ¹	1.19	g/cm³

Electrical	Nominal Value
Dielectric Constant (14.0 GHz)	2.77

Cured Properties	Nominal Value	Unit
Linear Shrinkage ²	0.020	%

Note Message
1 .	Cured resin
2 .	After 200°C (392°F) post-cure

Resin Grade	Manufacturer	Category	Trademark
Sylvin 8739-65FU Natural	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
Ultraform® N 2640 E2	BASF Corporation	Acetal (POM) Copolymer	Ultraform®
Akulon® F132-E2	DSM Engineering Plastics	Nylon 6	Akulon®
ICORENE® 3979	ICO Polymers APAC, A Division of A. Schulman	mHDPE	ICORENE®
Jam PE 09X02	Jam Petrochemical Company	LLDPE	Jam PE