Order Products : sales@su-jiao.com
HIVOREX 4100M
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | HIVOREX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ICU8Ei_HIVOREX-4100M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HIVOREX 4100M is produced by slurry process technology. This resin is ideally suited for use in pipe coating application. HIVOREX 4100M is designed to offer good processability, good ESCR. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.27 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | > 2000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 800 | % | ASTM D638 |
| Flexural Modulus | 785 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Melting Temperature | 128 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Technother® A-SV15-T | Poly Plastic | PBT | Technother® |
| Novamid® 1015C | DSM Engineering Plastics | Nylon 6 | Novamid® |
| Hostaform® C 9021 SW | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Osterlene® HI-8-2-hg | Osterman & Company | PS (HIPS) | Osterlene® |
| POLYFLAM® RPP 374ND | A. Schulman Inc. | PP, Unspecified | POLYFLAM® |
