Order Products : sales@su-jiao.com
GATONE™ 5700
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Solvay Specialities India Private Limited (SSIPL) |
| Trademark: | GATONE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IAwMxm_GATONE-5700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GATONE™ 5700 is a Polyetheretherketone (PEEK) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of GATONE™ 5700: Flame Rated. Typical application of GATONE™ 5700: Wire & Cable |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Volume-Flow Rate (MVR) (380°C/5.0 kg) | 35.0 to 70.0 | cm³/10min | ASTM D1238 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C, Injection Molded) | 3800 | MPa | ASTM D638 |
| Tensile Strength (23°C, Injection Molded) | 91.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus (23°C, Injection Molded) | 3600 | MPa | ASTM D790 |
| Flexural Strength (23°C, Injection Molded) | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 100 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 44 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 140 | °C | ASTM D648 |
| Continuous Use Temperature | 360 | °C | ASTM D794 |
| Glass Transition Temperature | 148 | °C | DSC |
| CLTE - Flow | 8.1E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 19 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C, 60 Hz) | 2.80 | ASTM D150 | |
| Dissipation Factor (23°C, 60 Hz) | 3.0E-3 | ASTM D150 | |
| Comparative Tracking Index (CTI) | 150 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.20 mm) | V-0 | UL 94 | |
| Oxygen Index | 40 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| alphalon™ E 33 LN | Grupa Azoty ATT Polymers GmbH | Nylon 6 | alphalon™ |
| AT 7110 | Celanese EVA Performance Polymers | LDPE | AT |
| FM® 300 | Cytec Industries Inc. | Epoxy | FM® |
| Polifil® PP T-40 | The Plastics Group | PP Homopolymer | Polifil® PP |
| LNP™ LUBRICOMP™ GL003 compound | SABIC Innovative Plastics | PSU | LNP™ LUBRICOMP™ |
