Order Products : sales@su-jiao.com

INEOS LDPE 23T930

Category:	LDPE , Low Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	INEOS LDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	I8g1yk_INEOS-LDPE-23T930.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
23T930 is a low-density polyethylene intended for injection rnoulding. It is a high MFR material, having good flow properties and allowing short cycle tirne. The rnoulded article is characterised by low degree of built-in stress, good stiffness and high gloss. Applications: 23T930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys.

Message

23T930 is a low-density polyethylene intended for injection rnoulding. It is a high MFR material, having good flow properties and allowing short cycle tirne. The rnoulded article is characterised by low degree of built-in stress, good stiffness and high gloss.

Applications:
23T930 is recommended for injection moulding of flexible products which require good flow properties and short cycle time. The material is especially suitable for thin walled products like caps and closures, household goods and toys.

General Information
Features	Fast Molding Cycle Good Flexibility Good Stiffness High Flow High Gloss Low Density
Uses	Caps Closures Household Goods Thin-walled Parts Toys
RoHS Compliance	Contact Manufacturer
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.923	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	22	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	49		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	180	MPa	ISO 527-2/1
Tensile Strain (Break)	130	%	ISO 527-2

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength	180	kJ/m²	ISO 8256/1

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	92.0	°C	ISO 306/A

Resin Grade	Manufacturer	Category	Trademark
Maxxam™ PE GF/10 Natural 70 NA	PolyOne Corporation	HDPE	Maxxam™
StarMediflex P 7057-1000	STAR Thermoplastic Alloys & Rubbers, Inc.	TPE	StarMediflex
Fainplast PVC PK 88/2-UV	Fainplast Compounds S.r.l	PVC, Flexible	Fainplast PVC
Lionpol HF-204585	Lion Polymers Incorporated	TPE	Lionpol
Polifor® PP FR 7B01 BIANCO 0080	SO.F.TER. SPA	PP, Unspecified	Polifor®