Order Products : sales@su-jiao.com
PLUSTEK RD120
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | PLUSTEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I6MLFi_PLUSTEK-RD120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYAMIDE 12 FOR EXTRUSION APPLICATIONS. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238, ISO 1133 |
| Molding Shrinkage | |||
| Flow | 0.46 to 1.2 | % | |
| -- | 0.46 to 1.2 | % | ISO 2577 |
| Water Absorption | |||
| Saturation | 1.5 | % | ASTM D570 |
| Saturation, 23°C | 1.5 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 34.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 300 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 400 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 20.0 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256, ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 175 | °C | ISO 11357-3, ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 215 to 255 | °C | |
| Middle Temperature | 220 to 260 | °C | |
| Front Temperature | 225 to 265 | °C | |
| Mold Temperature | 65.0 to 105 | °C | |
| Injection Pressure | 70.0 to 105 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 35.0 to 70.0 | MPa | |
| Back Pressure | 0.350 to 0.700 | MPa | |
| Screw Speed | 60 to 90 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 181 HI | RTP Company | PP Copolymer | RTP |
| RJM SF402-S | RJM International, Inc. | PPE | RJM |
| Ateva® 1075A | Celanese EVA Performance Polymers | EVA | Ateva® |
| ExxonMobil™ LDPE LD 165BW1 | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| OTECH ALLOY OM5130-Boot | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
