Monprene® PC-12235 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene PC-12235 is a high performance thermoplastic elastomer, available in NAT and colors, designed for a variety of personal care consumer product applications requiring a soft, rubber-like feel. Monprene PC-12235 is a low hardness, low density, high flow grade designed for injection molding.

General Information
Features	Low density Workability, good Good formability Good flexibility Good coloring Good adhesion High liquidity Good chemical resistance Good demoulding performance Halogen-free Hardness, low Elastic
Uses	Handle overmolding Washer Soft touch application Soft handle Rubber substitution Consumer goods application field Profile Toothbrush handle
Agency Ratings	FDA not rated
RoHS Compliance	RoHS compliance
Appearance	Light Blue Translucent Orange Pink Blue Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.891	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	13	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	44	ASTM D2240
Shaw A, 5 seconds	41	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	0.851	MPa	ASTM D412
Flow : 100% strain	1.44	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	4.60	MPa	ASTM D412
Flow : Fracture	4.29	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	770	%	ASTM D412
Flow : Fracture	730	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	19.5	kN/m	ASTM D624
Flow	22.6	kN/m	ASTM D624
Compression Set ⁵			ASTM D395
23°C, 22 hr	19	%	ASTM D395
70°C, 22 hr	99	%	ASTM D395

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	182 - 232	°C
Middle Temperature	188 - 238	°C
Front Temperature	193 - 243	°C
Nozzle Temperature	199 - 249	°C
Processing (Melt) Temp	199 - 249	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	182 - 232	°C
Cylinder Zone 2 Temp.	188 - 238	°C
Cylinder Zone 3 Temp.	193 - 243	°C
Cylinder Zone 4 Temp.	193 - 243	°C
Cylinder Zone 5 Temp.	199 - 249	°C
Die Temperature	199 - 249	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	I5kOWr_MonprenePC12235.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
YUPLENE® H350F	SK Global Chemical	PP Homopolymer	YUPLENE®
Arnite® T04 200	DSM Engineering Plastics	PBT	Arnite®
Gallonprene® GP410-8202	Shenzhen Sungallon Rubber & Plastic Corporation Limited	TPE	Gallonprene®
Karina BLACK PVC COMPOUND 811D48/ 1-D-AC	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
HI-ZEX MILLION™ 340M	Mitsui Chemicals, Inc.	HMWPE	HI-ZEX MILLION™