Order Products : sales@su-jiao.com
ICORENE® 9035
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | ICO Polymers APAC, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I4mgyp_ICORENE-9035.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE™ 9035 is a linear medium density polyethylene which exhibits a good balance of moulding and mechanical performance. This grade is suited to general purpose industrial parts while offering more rigidity compared with ICORENE™ 9048. ICORENE™ 9035 contains a fully formulated UV stabilisation package (with a minimum UV8 rating). The base resin in ICORENE™ 9035 is suitable for food contact applications, including conformance to FDA 21CFR177.1520 and EU Commission Directive 202/72/EC. For detailed information on compliance to specific standards please contact your account manager. ICORENE™ 9035 is available in a range of standard colours or as custom colours on request. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal) | > 300 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 17.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 700 | % | ASTM D638 |
| Flexural Modulus | 720 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength 3 | 54 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 115 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| UV Rating 4 | 8000 | hr | ASTM 2565 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | Impact strength varies with part thickness and moulding conditions. Prototype testing is highly recommended |
| 4 . | 50% Retained Tensile Elongation |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® S3CW | BASF Leuna GmbH | Nylon 66 | Miramid® |
| ACCUTECH™ HP0336G20M10CL | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Exelene® LLDPE 1401 | Montachem International, Inc. | LLDPE | Exelene® LLDPE |
| Epolene® N-10P | Westlake Chemical Corporation | LDPE | Epolene® |
| EnviroLac 530 | West Michigan Compounding | ABS | EnviroLac |
