Order Products : sales@su-jiao.com
Neoflex™ 8060
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Zylog Plastalloys Pvt. Ltd. |
| Trademark: | Neoflex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I2PbQT_Neoflex8060.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Neoflex 8060 is a soft, Thermoplastic Elastomer intended for Injection, Blow Moulding and Extrusion applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.10 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec, 23°C) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(100% Strain) | 4.41 | MPa | ASTM D412 |
| Tensile Strength 3(Break) | 7.26 | MPa | ASTM D412 |
| Tensile Elongation 4(Break) | 550 | % | ASTM D412 |
| Tear Strength 5 | 29.4 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 42 | % | ASTM D395B |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | C mold, 500 mm/min |
| 3 . | C mold, 500 mm/min |
| 4 . | C mold, 500 mm/min |
| 5 . | C mold, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MIDILENA III PPJ1400 | ROMPETROL PETROCHEMICALS S.R.L. | PP Homopolymer | MIDILENA III |
| SWANCOR Epoxy 976 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| Vistamaxx™ 7010FL | ExxonMobil Chemical | PP Elastomer | Vistamaxx™ |
| Biffa r-HDPE Tech Grade | Biffa Polymers Ltd | HDPE | Biffa |
| En Chuan 6130P | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
