Order Products : sales@su-jiao.com
MAJORIS EW460 - 1372
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I0Qdrl_MAJORIS-EW460---1372.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EW460 - 1372 is a 40% fiber / mineral filled polypropylene copolymer compound intended for injection moulding. The product is available in both black (EW460 - 8229) and natural (EW460) but other colours can be provided on request. EW460 - 1372 has been developed especially for the applications appliances and electrical components. APPLICATIONS Products requiring good rigidity, low shrinkage, high dimensional stability can suitably be made from EW460 - 1372. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 11 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.20 - 1.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus - 1% Secant | 2500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 50 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 130 | °C | ISO 75-2/B |
| Ball Pressure Test (138°C) | Pass | NF C 61-303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 750 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 220 - 270 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 203 MS | RTP Company | Nylon 66 | RTP |
| TAISOX 6334F | Formosa Plastics Corporation | LDPE | TAISOX |
| APEX® 69-8004-J | Teknor Apex Company | PVC, Flexible | APEX® |
| Jam PE 23507 | Jam Petrochemical Company | LLDPE | Jam PE |
| LUVOCOM® 1-8064 VP | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
