Order Products : sales@su-jiao.com
Garaflex™ G 7788-A6R NATURAL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | Garaflex™ G |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | I0NZQU_Garaflex-G-7788-A6R-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARAFLEX G 7788-A6R IS A LEAD FREE, FLAME RETARDED, OIL RESISTANT THERMOPLASTIC ELASTOMER INTENDED FOR INSULATION AND JACKETING APPLICATIONS. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 - 1.26 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 93 - 99 | ASTM D2240 | |
| Shaw A, 15 seconds | 89 - 95 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 24.8 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 500 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 3(136°C, 168 hr) | 0.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 4(136°C, 168 hr) | -2.0 | % | UL Unspecified |
| Change in Tensile Strength 5(60°C, 168 hr, in ASTM #2 Oil) | -8.0 | % | UL Unspecified |
| Change in Ultimate Elongation 6(60°C, 168 hr, in ASTM #2 Oil) | -4.0 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 4.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant (23°C, 100 MHz) | 2.30 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 5.0E-4 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 25 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 177 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 4 Temp. | 188 | °C | |
| Cylinder Zone 5 Temp. | 193 | °C | |
| Adapter Temperature | 193 | °C | |
| Melt Temperature | 193 - 204 | °C | |
| Die Temperature | 193 | °C |
| Extrusion instructions |
|---|
| Screw Design: General Purpose Polyethylene Screw (C/R 2.5:1 > 3.5:1)Screenpack: 40/80 or 40/100 |
| Note Message | |
|---|---|
| 1 . | Extruded Tape |
| 2 . | Extruded Tape |
| 3 . | Thickness: 30 mil |
| 4 . | Thickness: 30 mil |
| 5 . | Thickness: 30 mil |
| 6 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoPrene 87A-4000 | KMI Group Inc. | TPV Alloy | PrimoPrene |
| Thermoset Plastics 261 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Ultradur® B 4406 G6 Q113 | BASF Corporation | PBT+PET | Ultradur® |
| Dryflex® 938012 | ELASTO | TPE | Dryflex® |
| MARPOL® LDC 712 | Marco Polo International, Inc. | LDPE | MARPOL® LDC |
