Order Products : sales@su-jiao.com

Ingeo™ 6260D

Category:	PLA , Polylactic Acid
Manufacturer:	NatureWorks® LLC
Trademark:	Ingeo™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HzgBOd_Ingeo6260D.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Ingeo biopolymer 6260D, a NatureWorks product, is a thermoplastic fiber-grade resin derived primarily from annually renewable resources. Available in pellet form, 6260D is designed for melt blown fiber processing or extrusion into mechanically drawn staple fibers, using conventional fiber spinning and drawing equipment. 6260D is well suited for fiber processes where low boiling water fiber shrinkage and higher dimensional stability is required, in addition to low extrusion pressure. Ingeo biopolymer 6260D can be converted into a broad range of fiber products.

Potential applications for Ingeo biopolymer 6260D include:

Melt blown fiber

Staple fiber

Nonwovens

Agricultural woven and nonwoven fabrics

Articles for household disposal

Textiles

Spunbond fabrics

General Information
Features	High Dimensional Stability Comstable Updatable resources Compliance of Food Exposure
Uses	Meltblown Nonwovens staple fiber Spunbond nonwoven fabric Agricultural application Non-woven fabric Fiber
Agency Ratings	FDA Food Exposure, Not Rated Europe 10/1/2011 12:00:00 AM
Forms	Particle
Processing Method	Meltblown Nonwovens Fiber (spinning) extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.24	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (210°C/2.16 kg)	65	g/10 min	ASTM D1238
Relative Viscosity ¹(30°C)	2.50		ASTM D5225

Mechanical	Nominal Value	Unit	Test Method
Tensile Elongation ²	10 - 70	%	ASTM D2256

Thermal	Nominal Value	Unit	Test Method
Hot air contraction- 10 min ³(130°C)	4.00 - 5.00		ASTM D2101

Additional Information	Nominal Value	Unit	Test Method
Boiling Water Shrinkage ⁴	3.0 - 4.0	%	ASTM D2102
Denier per Filament ⁵	> 0.500	dpf
Modulus ⁶	30.0 - 55.0	g/denier	ASTM D2256
Tenacity ⁷	2.00 - 4.00	g/denier	ASTM D2256

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	55.0 - 60.0	°C	ASTM D3418
Peak Crystallization Temperature (DSC)	165 - 180	°C	ASTM D3418

Fill Analysis	Nominal Value	Unit	Test Method
Melt Density (210°C)	1.08	g/cm³

Extrusion	Nominal Value	Unit
Drying Temperature	80	°C
Drying Time	4.0 - 6.0	hr

Note Message
1 .	41.0 g/dL in chloroform
2 .	Spun at 225°C melt temp at 1500 mpm, drawn 2.7x at 95°C, heat set at 150°C
3 .	Spun at 225°C melt temp at 1500 mpm, drawn 2.7x at 95°C, heat set at 150°C
4 .	Spun at 225°C melt temp at 1500 mpm, drawn 2.7x at 95°C, heat set at 150°C
5 .	g/9000m , Spun at 225°C melt temp at 1500 mpm, drawn 2.7x at 95°C, heat set at 150°C
6 .	Spun at 225°C melt temp at 1500 mpm, drawn 2.7x at 95°C, heat set at 150°C
7 .	Spun at 225°C melt temp at 1500 mpm, drawn 2.7x at 95°C, heat set at 150°C

Resin Grade	Manufacturer	Category	Trademark
Marlex® HHM 5502BN	Chevron Phillips Chemical Company LLC	HDPE	Marlex®
Resiten® 120FR GG	ITEN INDUSTRIES	Phenolic	Resiten®
Titalon® 1300GF	Titan Plastics Compounds Co., Ltd.	Nylon 6	Titalon®
DuPure® R 50	Ducor Petrochemicals BV	PP Homopolymer	DuPure®
Sylvin 8980-80 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin