Order Products : sales@su-jiao.com

VICOTE® F804

Category:	PEEK , Polyetheretherketone
Manufacturer:	Victrex plc
Trademark:	VICOTE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HxxTIi_VICOTE-F804.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VICOTE F804 has been specifically formulated to provide a resilient coating with high wear and abrasion resistance on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other coatings would potentially fail. Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical and radiation resistance. VICOTE dispersions have a low level of extractables and inherently flame retardant. Contact Victrex for further details. VICOTE F804 dispersions are aqueous based, however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details. The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK™ polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for. For further chemical resistance information consult the Victrex Chemical Resistance Data sheets.

Message

VICOTE F804 has been specifically formulated to provide a resilient coating with high wear and abrasion resistance on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other coatings would potentially fail. Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical and radiation resistance. VICOTE dispersions
have a low level of extractables and inherently flame retardant. Contact Victrex for further details.

VICOTE F804 dispersions are aqueous based, however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK™ polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for. For further chemical resistance information consult the Victrex Chemical Resistance Data sheets.

General Information
Features	Flame Retardant Good Abrasion Resistance Good Chemical Resistance Good Wear Resistance High Heat Resistance Radiation (Gamma) Resistant Resilient
Uses	Coating Applications
Agency Ratings	FDA 21 CFR 175.300
Forms	Liquid
Processing Method	Coating Spraying

Mechanical	Nominal Value		Test Method
Coefficient of Friction ¹	0.53		ASTM G133

Thermal	Nominal Value	Unit
Continuous Use Temperature	260	°C

Additional Information	Nominal Value	Unit	Test Method
Cross Hatch Adhesion ²			ISO 2409
Aluminum	0.00
Mild Steel	0.00
Stainless Steel	0.00
Direct Impact ³			ISO 6272
Height	100.00	cm
Indentation depth	1.50	cm
Weight	1000	g
Konig Hardness (40.0 to 50.0 µm)	3.3	min	ISO 1522

Note Message
1 .	Using 100N Load, µm @ 10 min
2 .	Rating 0 to 5
3 .	Part 1

Resin Grade	Manufacturer	Category	Trademark
Tecomid® NB40 NL IX	Eurotec Engineering Plastics	Nylon 6	Tecomid®
SLOVALEN® PQ 83 T 20	Plastcom	PP+EPDM	SLOVALEN®
AKROLOY® PA GF 40 black (2845)	AKRO-PLASTIC GmbH	Nylon 66+Nylon 6I/6T	AKROLOY®
ELASTOSIL® LR 3003/05 A/B	Wacker Chemie AG	Silicone	ELASTOSIL® LR
MAJORIS GE264 - 8229	AD majoris	PP, Unspecified	MAJORIS