Evoprene™ G 622

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Mexichem Specialty Compounds Inc.
Trademark:	Evoprene™ G
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HwAGfb_EvopreneG622.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Evoprene™G 622 is a thermoplastic elastomer (TPE) product,. It is available in North America or Europe. Features include: flame retardant/rated flame Flame Retardant

General Information
Additive	Flame retardancy
Features	Flame retardancy
RoHS Compliance	Contact manufacturer
Appearance	Opacity
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Density	1.18	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shaw A, 10 seconds, 6.50mm)	72		ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain, 2.00 mm)	3.10	MPa	ISO 37
Tensile Stress (Yield, 2.00 mm)	9.40	MPa	ISO 37
Tensile Elongation (Break, 2.00 mm)	530	%	ISO 37
Tear Strength ¹(2.00 mm)	40	kN/m	ISO 34-1
Compression Set			ISO 815
22°C, 72 hr	21	%	ISO 815
70°C, 22 hr	34	%	ISO 815
100°C, 22 hr	46	%	ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (125°C, 336 hr)	5.0	%	ISO 188
Change in Tensile Strain at Break in Air (125°C, 336 hr)	-4.0	%	ISO 188
Change in Shore Hardness in Air (Shaw A, 125°C, 336 hr)	3.0		ISO 188

Flammability	Nominal Value		Test Method
Flame Rating (6.0 mm)	V-0		UL 94

Additional Information
The value listed as Density, ISO 1183, was tested in accordance with ISO 2782 test methods.Abrasion, DIN 53516: 181 mm³M-S, Alpha Gary Test Method: 19 kg/cm²M-S (Macklow Smith) flow measures force to extrude tape through die 10mm X 1mm. The higher the value the stiffer the flow (opposite to Melt Flow - MFI)Service Temperature: -30 to +140°COzone Resistance, 100 pphm, 200hrs, 20% strain, 35°C: No cracksOK for food contact: NoThermoplastic Compatability: PP

Additional Information

The value listed as Density, ISO 1183, was tested in accordance with ISO 2782 test methods.Abrasion, DIN 53516: 181 mm³M-S, Alpha Gary Test Method: 19 kg/cm²M-S (Macklow Smith) flow measures force to extrude tape through die 10mm X 1mm. The higher the value the stiffer the flow (opposite to Melt Flow - MFI)Service Temperature: -30 to +140°COzone Resistance, 100 pphm, 200hrs, 20% strain, 35°C: No cracksOK for food contact: NoThermoplastic Compatability: PP

Note Message
1 .	Method B, right-angle specimen (without cut)

Resin Grade	Manufacturer	Category	Trademark
Stanyl® TC155	DSM Engineering Plastics	Nylon 46	Stanyl®
Westlake Ardel®	Westlake Plastics Company	Polyarylate	Westlake
AURAPENE PPUFBK LMF	Aurora Manufacturing Ltd	TPO	AURAPENE
Sylvin 2968-70 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 9067-95 White 1298	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin