Order Products : sales@su-jiao.com

Pinnacle PP 3208

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HvziGQ_Pinnacle-PP-3208.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

8 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING

Pinnacle Polymers Polypropylene 3208 is made via UNIPOL PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for injection molding of automotive and consumer product applications. Also contains a long-term heat aging additive system.

The 3208 product provides:

Wet/Dry environment resistance

Superior balance of stiffness and impact strength

Excellent long term heat aging properties

Excellent color and processing stability

Enhanced weld-line strength

Pinnacle's 3208 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

General Information
Additive	Heat Stabilizer
Features	Food Contact Acceptable Good Color Stability Good Heat Aging Resistance Good Processing Stability Heat Stabilized High Impact Resistance Impact Copolymer Weldable
Uses	Automotive Applications Consumer Applications
Agency Ratings	FDA 21 CFR 176.170 Table 1 & 2, Cond A-H FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	8.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.3	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	23.5	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	7.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1070	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	> 320	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	> 31.0	kJ/m²	ASTM D256
Gardner Impact ⁶(-30°C)	33.0	J	ASTM D5420

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	81.0	°C	ASTM D648

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I
6 .	Method G, Geometry GC

Resin Grade	Manufacturer	Category	Trademark
S&E PVC GF-1831RS	S&E Specialty Polymers, LLC	PVC+NBR	S&E PVC
EMPILON® HT65	EMPILON	SEBS	EMPILON®
LNP™ THERMOCOMP™ RC003SXS compound	SABIC Innovative Plastics Europe	Nylon 66	LNP™ THERMOCOMP™
Telcar® TL-8730A	Teknor Apex Company	TPE	Telcar®
Sylvin 9077-80 Blue 8369	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin