Order Products : sales@su-jiao.com
Flexane® Fast Cure Rubber Repair Liquid
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Devcon |
| Trademark: | Flexane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HrubFF_Flexane-Fast-Cure-Rubber-Repair-Liquid.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A fast-curing, trowelable liquid urethane for repairing rubber equipment and filling expansion joints. Intended Use:
Product Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Volume | 0.957 | cm³/g | |
| Solid content- by Volume | 100 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 330 | mg/1000 cycles |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Maximum Operating Temperature | |||
| Dry | 82 | °C | |
| Wet | 49 | °C |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.18 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 22.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Tear Strength | 75.3 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 14 | kV/mm | ASTM D149 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Resin | Mixing ratio by weight: 80 | ||
| Hardening method | Mixing ratio by weight: 20 | ||
| Pot Life (24°C) | 8.0 | min | |
| Thermoset Mix Viscosity | 5800 | cP |
| Additional Information |
|---|
| Cured 7 days @ 75°F |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 2.0 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecodur® PB70 BK001 MC | Eurotec Engineering Plastics | PBT | Tecodur® |
| ADDILENE H 560 | ADDIPLAST | PP Homopolymer | ADDILENE |
| Badamid® A70 S | Bada AG | Nylon 66 | Badamid® |
| ColorFast® FRPBT200 | LTL Color Compounders, Inc. | PBT | ColorFast® |
| IDI SMC S42 (Glass Content 30%) | IDI Composites International | TS, Unspecified | IDI SMC |
