Order Products : sales@su-jiao.com
CONAPOXY® FR-1274
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAPOXY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HrU5DL_CONAPOXY-FR-1274.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
CONAPOXY FR-1274 is a two-component, low exotherm, flame retardant, long pot life epoxy potting and casting system. Because of its excellent thermal shock resistance, CONAPOXY FR-1274 is recommended for the encapsulation of strain sensitive devices. CONAPOXY FR-1274 is also an excellent system for potting and encapsulating electrical/electronic devices such as modules, transformers, and coils.
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.60 | g/cm³ | |
| -- | 1.66 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 37.9 | MPa | |
| Compressive Strength | 71.7 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | 45.0 to 55.0 | °C | |
| CLTE - Flow | 4.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.84 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 3.0E+17 | ohms | |
| Volume Resistivity | 8.0E+14 | ohms·cm | |
| Dielectric Strength | 16 | kV/mm | |
| Dielectric Constant | |||
| 25°C, 100 Hz | 4.42 | ||
| 25°C, 1 kHz | 4.25 | ||
| 25°C, 1 MHz | 3.91 | ||
| Dissipation Factor | |||
| 25°C, 100 Hz | 0.076 | ||
| 25°C, 1 kHz | 0.022 | ||
| 25°C, 1 MHz | 0.014 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life (25°C) | 150 | min | |
| Shelf Life | 52 | wk | |
| Thermoset Mix Viscosity | |||
| 25°C 2 | 40000 | cP | |
| 25°C 3 | 55000 | cP | |
| 25°C 4 | 27000 | cP | |
| Demold Time | |||
| 25°C | 1400 to 2900 | min | |
| 60°C | 180 to 300 | min | |
| 80°C | 60 to 120 | min |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Peak Exotherm - 200 gram mass | 43 | °C |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Linear Shrinkage | 0.10 | % |
| Note Message | |
|---|---|
| 1 . | Mix |
| 2 . | Mix |
| 3 . | Hardener |
| 4 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Propionate 384A4000016 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| Thermylene® P6-15FG-1734 | Asahi Kasei Plastics North America Inc. | PP, Unspecified | Thermylene® |
| ALCOM® PA66 910/1 GB30 MO2 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
| Ferro PP VX-34035 | Ferro Corporation | PP Copolymer | Ferro PP |
| Kaneka MUH E7301 | Kaneka Corporation | ABS | Kaneka MUH |
