Order Products : sales@su-jiao.com
Moharamplast PP MP-COAT 9010
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Moharamplast S.A.E |
| Trademark: | Moharamplast PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HqMfMl_Moharamplast-PP-MP-COAT-9010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
A white polypropylene compound designed for coating steel pipes in oil and gas applications. Antioxidants, UV stabilizer, processing aids and other additives are added to obtain excellent long term properties and better processability ensuring protection against extreme external conditions, mechanical impacts or degradation by heat or UV irradiation. It can be used up to 115°C service temperature of the pipeline when combined with the grafted adhesive. Safety MP COAT-9010 is classified as no-dangerous material. We advise you to follow our safety guidelines and recommendations in our Material Safety Data Sheet. Typical Applications MP COAT-9010 is designed for use in (3LPP) steel pipe coating system, suited for high temperature pipeline applications in conjunction with an epoxy primer and a polyolefin adhesive. It is mainly used for coating steel pipes in oil and gas applications and thus help in minimizing the potential for corrosion of underground steel pipes. Specifications MP COAT-9010 complies with the requirements of the standards DIN 30 678 and ISO 21809-1 part 1 when the product is processed using the correct extrusion practice and testing procedures. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| -- | > 5000 | hr | ASTM D1693A |
| -- | > 5000 | hr | ASTM D1693B |
| -- | > 5000 | hr | ASTM D1693C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | > 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | > 21.6 | MPa | |
| Break | > 29.4 | MPa | |
| Tensile Elongation (Break) | > 1200 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resistance | > 100 | J/cm | ISO 21809-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 210 to 230 | °C |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -40.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 140 | °C | ASTM D1525 |
| Melting Temperature | > 160 | °C | ASTM D2117 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 to 220 | °C | |
| Cylinder Zone 3 Temp. | 190 to 220 | °C | |
| Cylinder Zone 5 Temp. | 190 to 220 | °C | |
| Melt Temperature | 220 to 240 | °C | |
| Die Temperature | 210 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3675 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| TITANLENE® LDF 204GH | Lotte Chemical Titan (M) Sdn. Bhd. | LDPE | TITANLENE® |
| TOTAL Polyethylene XSene® HDPE XRC 20 B | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Bayfit® 49BM02(90 Index, 86 kg/m³) | Covestro - PUR | PUR, Unspecified | Bayfit® |
| Medalist® MD-12150H (PRELIMINARY DATA) | Teknor Apex Company | TPE | Medalist™ |
