Order Products : sales@su-jiao.com
SABIC® PP 513MN40
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | SABIC Americas, Inc. |
| Trademark: | SABIC® PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HqIisX_SABIC-PP-513MN40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product Description PP 513MN40 is a Controlled Rheology PP grade of narrow molecular weight distribution. It contains an antistatic agent and especially developed for producing injection molded articles. This grade has a good impact resistance (even at low temperature). Typical Applications PP 513MN40 can be used for General purpose thin wall injection molding applications (Food & Non-Food). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Molding Shrinkage | 1.2 to 2.5 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 94 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Injection Molded) | 1200 | MPa | ASTM D638 |
| Tensile Strength (Yield, Injection Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, Injection Molded | 35 | J/m | |
| 23°C, Injection Molded | 70 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 92.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 150 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 200 to 245 | °C | |
| Middle Temperature | 200 to 245 | °C | |
| Front Temperature | 200 to 245 | °C | |
| Mold Temperature | 15.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Rate B (120°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil MED6-6606 | NuSil Technology | Silicone | NuSil |
| ECOMID A | Nilit Plastics | Nylon 66 | ECOMID |
| KYOCERA TCG1604 | KYOCERA Chemical Corporation | TS, Unspecified | KYOCERA |
| Sylvin 9423-55 BLACK | Sylvin Technologies Incorporated | PVC+PUR | Sylvin |
| Sylvin 83055-58D Black | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
