Order Products : sales@su-jiao.com
Di-Pak™ R-4912
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Hapco Inc. |
| Trademark: | Di-Pak™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HpbxYA_Di-Pak-R-4912.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RIGID DI-PAK R-4912 & R-4260 A/B Low viscosity, fast cure, high performance, high HDT potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume. Available in flame retardant |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.20 to 0.70 | % | ASTM D2566 |
| Weight - per cubic inch | 20 | g |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | 140 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 1.0 | min | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 82 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 44.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 7.1 | % | ASTM D638 |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Flexural Strength | 62.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 39 | J/m | ASTM D256 |
| Unnotched Izod Impact | 91 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.20 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 3.1E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | 19 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 3.60 | ||
| 100 kHz | 3.30 | ||
| Dissipation Factor (25°C, 100 kHz) | 0.23 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 90, Mix Ratio by Volume: 100 | ||
| Thermoset Mix Viscosity (25°C) | 500 | cP | ASTM D4878 |
| Demold Time (21°C) | 10 to 15 | min |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEDUR® L 9400-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Wellamid® GF13-66 XE-N | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| AZDEL™ C467-B01 | Azdel, Inc. | PP, Unspecified | AZDEL™ |
| Ebalta Silicone High Solid | Ebalta Kunststoff GmbH | Silicone | Ebalta |
| LUVOCOM® 1105/GY7993 VP | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
