Order Products : sales@su-jiao.com
Badaflex® TPE-S 20A 1563
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HlLPKS_Badaflex-TPE-S-20A-1563.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoplastic Elastomer based on SEBS Copolymer Overmoulding capability: Polypropylene (PP) |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 20 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 2.00 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 600 | % | DIN 53504 |
| Compression Set | DIN 53515 | ||
| 23°C, 72 hr | 15 | % | |
| 70°C, 24 hr | 40 | % | |
| 100°C, 24 hr | 75 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 10.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 220 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miflon® 2223B | Jiangsu Meilan Chemical Co., Ltd. | PTFE | Miflon® |
| SOLPLAST TC 2000B | UTEKSOL d.o.o. | SBS | SOLPLAST TC |
| Nivionplast® B 273MR NATURALE | SO.F.TER. SPA | Nylon 6 | Nivionplast® B |
| ICORENE® 1761 | ICO Polymers EMEA, A Division of A. Schulman | mMDPE | ICORENE® |
| POCAN® S 1506 000000 | LANXESS GmbH | PBT | POCAN® |
