Order Products : sales@su-jiao.com
Clyrell EC5080
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | PolyMirae |
| Trademark: | Clyrell |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HiHmGL_Clyrell-EC5080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Clyrell EC5080 is a thermoplastic polyolefin, which has been developed for EBM and sheet/ thermoforming application. Clyrell EC5080 can overcome the limitations of conventional PP because of good low temp impact resistance with good transparency. Therefore, customer can contribute a differentiated competitiveness for extrusion blow molding/ sheet/ TF markets Product Features Good low temperature impact resistance/ Good optical proprty Typical Applications Blow Molding applications/ Sheet and Thermoforming applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 17 | % | ASTM D638 |
| Flexural Modulus | 706 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VAMPLUB F 30C 3TF | Vamp Tech | PPS | VAMPLUB |
| Anjatech® 250-E/GF15 | Almaak International GmbH | Nylon 6 | Anjatech® |
| Daelim Po1y® TR-570H | DAELIM INDUSTRIAL CO., LTD. | HDPE, HMW | Daelim Po1y® |
| Grilamid® 1SVX-65H nat | EMS-GRIVORY | Nylon 1010 | Grilamid® |
| Sylvin 5170-85 White 1535 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
