Order Products : sales@su-jiao.com
TOTAL Polyethylene Lumicene® BM 359 SG
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | TOTAL Refining & Chemicals |
| Trademark: | TOTAL Polyethylene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HhRLX5_TOTAL-Polyethylene-Lumicene-BM-359-SG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TOTAL Polyethylene BM359 SG is a polyethylene material,. This product is available in North America or Asia Pacific region. The processing method is blow molding or injection blowing molding. The main features of the TOTAL Polyethylene BM359 SG are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.935 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.90 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 25 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693B | ||
| 10% Igepal, F50 | > 1000 | hr | ASTM D1693B |
| 100% Igepal, F50 | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D638 |
| Flexural Modulus | 738 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 560 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 124 | °C | ASTM D3418 |
| Additional Information |
|---|
| Cold Temperature Impact Energy, ASTM D3763, -20°C: 23.0 ft-lbElongation at Break, ASTM D638, Type IV, 2 in/min: >600%Gloss, TOTAL Method, 60°: 40 to 80 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 182 - 199 | °C |
| Note Message | |
|---|---|
| 1 . | Type 4, 51mm/min |
| 2 . | Type 4, 51mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PC PC0800 resin | SABIC Innovative Plastics Asia Pacific | PC | SABIC® PC |
| Salflex 620KC4 | Salflex Polymers Ltd. | PP, Unspecified | Salflex |
| DOW™ LDPE 207M | The Dow Chemical Company | LDPE | DOW™ LDPE |
| APEX® 86-K436-A | Teknor Apex Company | PVC, Flexible | APEX® |
| Dryflex® CS 40A001N | ELASTO | SEBS | Dryflex® |
