Order Products : sales@su-jiao.com
MEGOLON™ HF 8037 DD NATURAL
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | AlphaGary |
| Trademark: | MEGOLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HezNbC_MEGOLON-HF-8037-DD-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MEGOLON HF 8037 DD IS AN OIL RESISTANT, LOW DIE DROOL, HALOGEN FREE FLAME RETARDANT JACKETING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 to 1.58 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/10.0 kg) | 0.40 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 89 to 95 | ||
| Shore A, 15 sec | 82 to 88 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 11.7 | MPa | ASTM D638 |
| Tensile Elongation (Break, 0.762 mm) | 300 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1 | UL Unspecified | ||
| 121°C, 168 hr | 15 | % | |
| 136°C, 168 hr | 15 | % | |
| Change in Ultimate Elongation in Air 2 | UL Unspecified | ||
| 121°C, 168 hr | -10 | % | |
| 136°C, 168 hr | -20 | % | |
| Change in Tensile Strength | |||
| 50°C, 24 hr 3 | 10 | % | MIL C-24643 |
| 100°C, 24 hr 4 | -10 | % | MIL C-24643 |
| 121°C, 18 hr, in ASTM #2 Oil 5 | 15 | % | UL Unspecified |
| Change in Ultimate Elongation | |||
| 50°C, 24 hr 6 | -15 | % | MIL C-24643 |
| 100°C, 24 hr 7 | -5.0 | % | MIL C-24643 |
| 121°C, 18 hr, in ASTM #2 Oil 8 | -5.0 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -28.0 | °C | ASTM D746 |
| Hot Pressure Test - % Loss (80°C) | 12 | % | IEC 811-3-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| NBS Smoke Density | ASTM E662 | ||
| Flaming, Dm : 2.54 mm | 82.0 | ||
| Non-Flaming, Dm : 2.54 mm | 146 | ||
| Smoke Index | 8.00 | NES 711 | |
| Oxygen Index (3.18 mm) | 40 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| 3 . | in MIL-L-17672, Thickness: 30 mil |
| 4 . | in MIL-L-17331, Thickness: 30 mil |
| 5 . | Thickness: 30 mil |
| 6 . | in MIL-L-17672, Thickness: 30 mil |
| 7 . | in MIL-L-17331, Thickness: 30 mil |
| 8 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 4MID® 9A22130 HR | 4Plas | Nylon 66 | 4MID® |
| Lupoy® SR3108FC | LG Chem Ltd. | PC | Lupoy® |
| Adstif EA6052 | HMC Polymers | PP Impact Copolymer | Adstif |
| Tribocomp® PA66 LGF30 PTFE18 N6 | Solvay Specialty Polymers | Nylon 66 | Tribocomp® |
| Pujie CM40L | Zhanhua Pujie Chemical Technology Co.,Ltd | CPE | Pujie |
