Order Products : sales@su-jiao.com
SUSTAPEEK MG blue
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Röchling Sustaplast SE & Co. KG |
| Trademark: | SUSTAPEEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HeoXm9_SUSTAPEEK-MG-blue.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Product characteristics
Typical fields of application
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.41 | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.20 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 88 | ISO 868 | |
| Ball Indentation Hardness | 230 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 110 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 15 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 152 | °C | ISO 75-2/A |
| Continuous Use Temperature | |||
| -- 1 | -60.0 to 250 | °C | |
| -- 2 | < 310 | °C | |
| Melting Temperature | 343 | °C | ISO 11357-3 |
| CLTE - Flow | 5.0E-5 | cm/cm/°C | DIN 53752 |
| Specific Heat | 1340 | J/kg/°C | DIN 52612 |
| Thermal Conductivity | 0.25 | W/m/K | DIN 52612 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+18 | ohms | IEC 60093 |
| Volume Resistivity | 4.9E+16 | ohms·cm | IEC 60093 |
| Electric Strength | 20 | kV/mm | IEC 60243-1 |
| Dielectric Constant | 3.20 | IEC 60250 | |
| Dissipation Factor (50 Hz) | 1.0E-3 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | V-0 | ||
| 6.00 mm | V-0 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200.7 | RTP Company | Nylon 66 | RTP |
| RTP 103 CC HB | RTP Company | PP, Unspecified | RTP |
| VAMPLEN 2528 V0 CB | Vamp Tech | PP, Unspecified | VAMPLEN |
| NuSil EPM-2461 | NuSil Technology | Silicone | NuSil |
| Pexidan® U/T | Saco Polymers | XLPE | Pexidan® |
